Tree Guy Line Kits Model 40 DTS Kit Model 68 DTS Kit Model 88 DTS Kit Model 138 DTS Kit Root Ball Kits Model 40 RBK Kit Model 68 RBK Kit Model 88 RBK Kit Multi Purpose Anchors Model 40-DBI Model 68-DBI Model 88-DBI Model 138-DBI Security/Anti-Theft Anchors Model 68-AT1 Model 88-AT1 Model 68-ATC Model 88-ATC Drive Steels Model DS-40 Model DS-68 Model DS-68HD Model DS-88 Special Applications Palm Tree Strap Model 88 DTS Kit For Trees Up To 11-inch (279 mm) Diameter Model 88 DTS Installation Instructions 1. Drive anchor approximately 40" to 42" (100cm to 105cm) into the ground using heavy hammer and DS88 round steel drive rod (not included in kiit). Rod has 3/4" (19mm) round driving tip. 2. Remove drive steel. Wrap cable around drive steel and pull up. This rotates anchor into anchor lock position like a toggle bolt in undisturbed earth. 3. Place tree collar around tree above a limb. Insert cable through tree collar holes and adjust untill wire rope is taut. Securely attach 2 wire rope clamps as shown in drawing. Adjust turnbuckle. Install additional Duckbill tree supports. ANCHOR MUST BE DRIVEN INTO THE EARTH AT THE INTENDED ANGLE OF THE GUYLINE

©2001 Foresight Products, LLC